Under a minute
Aetava 1.0 returns a usable furniture mesh in about a minute — ship concepts the same session.
Generate now →High quality
Multi-angle Aetava 1.0 improves geometry and texture so pieces look right in StyleBoard rooms.
Open Aetava 1.0 →Lower credit use
Efficient AI tokens — typically less credit spend per generation than broad multi-engine 3D platforms.
See pricing →Room-ready scale
Set real width, depth, and height, then drop the GLB into Room Builder or StyleBoard.
Open room →Fast. Sharp. Efficient.
Aetava 1.0 is the Aetava AI pipeline for multi-angle furniture photos — high quality in about a minute, with credit use tuned lower than general-purpose 3D platforms.
~1 minute generationAetava 1.0 qualityLower AI credit use
Trusted across industries
- Interior Design
- Product Design
- Retail Merchandising
- Trade Showrooms
- Architecture
- E-commerce
Why it wins
Minute-scale generation. Platform-beating efficiency.
High-quality GLB from catalog photos, real dimensions, and credit packs that go further — because each Aetava 1.0 run is tuned for furniture, not a heavy multi-engine stack.
Typical Aetava 1.0 run
~1 min
~30 credits
Fast turnaround, strong furniture quality, and lower token / credit use than typical 3D generation platforms.
Try Image to 3DWhy choose Aêtava 3D?
Speed, furniture-grade quality, and efficient AI credits — the three reasons teams switch from heavier 3D studios.
3D in about a minute
Aetava 1.0 is built for speed: upload angles, generate, preview — without waiting on an outsourced modeler.
Quality for furniture
Tuned for product photography and interiors, not generic game props. Multi-view input keeps silhouettes clean.
Fewer tokens, more runs
About 30 AI credits per typical Aetava 1.0 run — efficient metering so packs stretch further than heavy studio platforms.
Competitor comparison
Built for furniture — not another general 3D sandbox
Meshy, Tripo, and 3D AI Studio ship powerful general image-to-3D. Aêtava wins when the job is catalog furniture: multi-angle photos, true scale, and the same StyleBoard / Room Builder your clients already use.
| Capability | Aêtava 1.0 | Typical general AI 3D studio |
|---|---|---|
| Primary focus | Furniture, finishes & interiors | Game assets, props, general 3D |
| Input | Multi-angle product photos (Aetava 1.0) | Often single image or text prompt |
| Scale | Real width × depth × height on export | Unitless mesh; scale later in DCC |
| Where it lands | StyleBoard + Room Builder (same stack) | Download GLB / FBX into another tool |
| Metering | ~30 credits / multi-view furniture run | Credits per stage (mesh, texture, refine…) |
| Buying model | Stripe AI credit packs (pay as you go) | Usually monthly subscription tiers |
| Typical turnaround | About a minute to usable GLB | Minutes + queue; more steps for production |
Comparison is category-level. Competitor products evolve — choose the tool that matches your workflow.
Technical differentiation
The Aetava AI pipeline under the hood
Aetava 1.0 is not a thin wrapper on a public demo. It is a furniture multi-view path wired into trade design workflows.
Aetava 1.0 multi-view pipeline
Upload front, side, and back product angles. The pipeline synthesizes coherent views and reconstructs a furniture mesh tuned for catalog photography — not a generic single-shot toy model.
Dimensioned GLB export
Set real-world width, depth, and height before generate. The GLB arrives at true scale for Room Builder placement and StyleBoard quotes — no guesswork in Blender first.
Interior workflow, not a sidecar app
Generation lives next to StyleBoard, Room Builder, finishes, and trade catalogs. One login, one credit balance, one place clients already design rooms.
Efficient credit metering
A typical Aetava 1.0 run is about 30 AI credits for the multi-view furniture path — purpose-built so packs stretch across catalog SKUs instead of burning stages on unrelated 3D tools.
Simple credit pricing
Same packs as Finance Center. ~30 credits per Aetava 1.0 run — buy in studio with Stripe.
Loading credit packs…
Sign in required for Stripe checkout. Per generation ≈ 30 AI credits on Aetava 1.0.
Transparent metering
Price per generation, credits, and commercial use
A typical Aetava 1.0 run uses about 30 AI credits and lands around ~$3–$4 per successfully generated furniture model — in about a minute.
Price per generation
~$3–$4
Approximate retail cost for one Aetava 1.0 run from Stripe credit packs (~$3.00 on the largest pack to ~$3.90 on the entry pack). Exact $/run depends on the pack you buy.
Credits per generation
~30
A typical Aetava 1.0 multi-view furniture run meters about 30 AI credits — one efficient path instead of separate mesh, texture, and refine stages.
Cost per successful model
~$3–$4
Same ballpark as price per generation when the run completes successfully. Buy pay-as-you-go packs; unused credits stay on your balance for StyleBoard AI features.
Model quality
Furniture-grade
Multi-angle Aetava 1.0 geometry with real-world width, depth, and height so the GLB sits correctly in Room Builder and StyleBoard — tuned for catalog furniture, not generic game props.
Processing time
~1 minute
Typical turnaround from product photos to a usable dimensioned GLB is about a minute — built for same-session interior iteration.
Commercial usage rights
Account terms
Generated models are for your commercial StyleBoard, Room Builder, and catalog workflows under your Aêtava account terms. Rights remain subject to Aêtava’s terms of service — not a separate CC license from a general 3D sandbox.
Approximate retail based on Finance Center credit packs. Pack prices can change; checkout shows the charged amount. Commercial use is subject to Aêtava account terms.
FAQ
- How fast is Aêtava 3D generation?
- Aetava 1.0 typically returns a usable furniture mesh in about a minute from product photos — far faster than manual modeling, and built for quick StyleBoard iteration.
- How many AI credits per generation?
- A typical Aetava 1.0 multi-view furniture run uses about 30 AI credits — one metered path for mesh and texture instead of stacking separate studio tool charges.
- What is the price per generation?
- With current Stripe credit packs, one successful Aetava 1.0 run is about ~$3–$4 USD (30 credits). Entry packs land near ~$3.90 per run; larger packs closer to ~$3.00. Pack prices are set in Finance Center and may change.
- What is the cost per successfully generated model?
- When a run completes successfully, expect about ~$3–$4 at retail credit rates. Credits are prepaid via Stripe packs and remain available for other Aêtava AI features.
- Is the 3D quality good enough for interiors?
- Yes. Aetava 1.0 is tuned for furniture and product shots: multi-angle input improves geometry, and you set real-world width, depth, and height so the GLB lands at true scale in Room Builder and StyleBoard.
- What are the commercial usage rights for generated models?
- Models generated on your Aêtava account are intended for your commercial StyleBoard, Room Builder, and catalog workflows, subject to Aêtava’s terms of service. This is not a Creative Commons grant from a third-party 3D sandbox — rights follow your Aêtava agreement.
- How is Aêtava different from Meshy, Tripo, or 3D AI Studio?
- Those platforms are excellent general AI 3D studios for game assets and creative exploration. Aêtava is furniture-first: multi-angle product photos, real-world dimensions, and direct placement into StyleBoard and Room Builder — the same stack interior teams already use for finishes and quotes.
- Does Aêtava use fewer AI credits than other 3D platforms?
- A typical Aetava 1.0 multi-view furniture run is about 30 AI credits. General studios often meter separately for mesh, texture, refine, and add-ons. Our path is one efficient run optimized for catalog furniture — so credit packs stretch across more SKUs.
- What is Aetava 1.0?
- Aetava 1.0 is our multi-view image-to-3D path: upload different camera angles of the same product, generate a high-quality mesh in about a minute, then scale it to your measurements.
- Do I need a monthly 3D subscription?
- No. Buy Stripe AI credit packs when you need them. Credits apply across Aêtava AI features — including Aetava 1.0 — without locking you into a separate 3D studio plan.
- How do I generate a model?
- Open Aetava 1.0 Studio, upload 2–4 product angles (front, side, back), set dimensions, and generate. Sign in is required; buy Stripe AI credit packs when your balance is low.
Who said 3D had to be slow or expensive?
About a minute. High quality. Fewer credits than typical platforms — then drop it into StyleBoard.